Journal Papers
2013	Gupta A, Kelly PA, Ehrgott M, Bickerton S, A surrogate model based evolutionary game-theoretic approach for optimising non-isothermal compression RTM processes, Comp Sci Tech, 84, 92-100.
2012	Gupta A, Kelly PA, Bickerton S, Walbran WA, Simulating the effect of temperature elevation on clamping force requirements during rigid-tool liquid composite moulding processes, Composites: Part A, 43, 2221-2229.
2012	Walbran WA, Bickerton S, Kelly PA, Evaluating the shear component of reinforcement compaction stress during liquid composite moulding processes, J Comp Mat, DOI: 10.1177/0021998312441811.
2012	Walbran WA, Bickerton S, Kelly PA, Evaluating the shear component of reinforcement compaction stress during liquid composite moulding processes, J Comp Mat, 47(5), 513-528.
2012	Walbran WA, Verleye B, Bickerton S, Kelly PA, Prediction and experimental verification of normal stress distributions on mould tools during liquid composite moulding, Composites: Part A, 43(1), 138-149.
2012	Timms, J., Bickerton, S., & Kelly, P.A. (2011) Laminate Thickness and resin pressure evolution during axisymmetric liquid composite moulding with flexible tooling, Comp Part A, 43(4), 621-30.
2012	Cheng JJ, Kelly PA, Bickerton S, A rate-independent thermomechanical constitutive model for fiber reinforcements, J Comp Mat, 46(2), 247-256.
2011	Kelly PA, A Viscoelastic Model for the Compaction of Fibrous Materials, J Textile Institute, 102(8):689-699 2011.
2011	Kelly PA, Bickerton S, Cheng JJ, Transverse Compression Properties of Textile Materials, Advanced Materials Research, 332-334, pp 697-701.
2011	Verleye B, Walbran WA, Bickerton S, Kelly PA, Simulation and Experimental validation of force controlled compression resin transfer moulding, J Comp Mat, 45(7), 815-829.
2010	Govignon Q, Bickerton S, Kelly PA, Simulation of the reinforcement compaction and resin flow during the complete resin infusion process, Composites: Part A, 41, 45-57.
2009	Kelly PA, Bickerton S, A comprehensive filling and tooling force analysis for rigid mould LCM processes, Composites: Part A, 40, 1685-1697.
2009	Collins IF, Kelly PA, Constrained thermomechanical, rigid-plastic models of granular materials, Int J Eng Sci, 47, 1163-1169.
2009	Walbran WA, Bickerton S, Kelly PA, Measurements of normal stress distributions experienced by rigid liquid composite moulding tools, Composites: Part A, 40, 1119-1133.
2008	Govignon Q, Bickerton S, Morris J., Kelly PA, Full field monitoring of the resin flow and laminate properties during the resin infusion process, Composites: Part A, 39, 1412-1426.
2007	Bickerton S. and Kelly PA, Application of a complete tooling force analysis for simulation of liquid composite moulding processes, Advances in Composite Materials and Structures, Pts 1 and 2, 334-5, 17-20.
Conference Papers
2013	Cheng JJ, Kelly PA, Textile Compression and Its Effect on Resin Flows in Composites Manufacturing, 5^th international conference on Porous Media (INTERPORE), Prague, May 21-24, 2013.
2013	Gupta A, Kelly PA, Ehrgott M, Bickerton S, Applying Bi-level Multi-objective evolutionary algorithms for Optimizing Composite Manufacturing Processes, 7^th international conference on Evolutionary Multi-criterion Optimization (EMO), Sheffield, UK, Mar 19-22, 2013.
2012	Gupta A, Kelly PA, A new viscoelastic fibre compaction model for rapid computations in composte manufacturing, 3^rd Asian Conference on Mechanics of Functional Materuials and Structures, New Delhi, India, Dec 5-8, 2012.
2012	Govignon Q, Maes L, Verleye B, Bickerton S, Kelly PA, A 2.5D simulation of the filling and post-filling stages of the Resin Infusion process, 11^th international conference on flow processes in Composite Materials (FPCM11), Auckland, New Zealand, July 9-12, 2012.
2012	Timms J, Bickerton S, Kelly PA, Numerical simulation of resin flow, mould deflection and reinforcement deformation in RTM Light processing, 11^th international conference on flow processes in Composite Materials (FPCM11), Auckland, New Zealand, July 9-12, 2012.
2012	Gupta A, Kelly PA, Ehrgott M, Bickerton S, Neural network versus Kriging, surrogate models for LCM process optimisation, 11^th international conference on flow processes in Composite Materials (FPCM11), Auckland, New Zealand, July 9-12, 2012.
2011	Kumar P, Kelly PA, Continuous strain stimulus for the development of osteoarthritis, Osteoarthritis research society international (OARSI) world congress on osteoarthritis, San Diego, 15-18 Sept, 2011.
2011	Govignon Q, Bickerton S, Kelly PA, Homogenisation of compaction behaviour and permeability for multi-layered composite structures manufactured via LCM processes, 16^th international conference on composite structures (ICCS 16), Porto, 28-29 June 2011.
2011	Timms J, Bickerton S, Kelly PA, Numerical Simulation of the RTM light manufacturing process, 18^th international conference on composite materials (ICCM 18), Jeju, Korea, 21-26 Aug, 2011.
2011	Walbran WA, Verleye B, Bickerton S, Kelly PA, RTM and CRTM simulation of complex parts, Proceedings of the 19^th Processing and fabrication of advanced materials (PFAM) conference (pp. 1302-1314), Auckland, 14-17 Jan 2011.
2011	Kelly PA, Bickerton S, Cheng JJ, Transverse compression properties of textile materials, International conference on textile engineering and materials, Tianjin, 23-25 Sept, 2011.
2010	Timms J, Bickerton S, Kelly PA, Numerical simulation of the filling stage of axisymmetric Liquid composite Moulding processes with flexible tooling: formulation and experimental validation, 25^th American Society for Composites (ASC) Technical Conference, 20-23 Sep, 2010.
2010	Timms J, Govignon Q, Bickerton S, Kelly PA, Observations from the filling and post-filling stages of axisymmetric liquid composite moulding with flexible tooling, 10^th international conference on flow processes in Composite Materials (FPCM10), Ascona, Switzerland, July 11-15, 2010.
2010	Walbran WA, Verleye, B, Bickerton S, Kelly PA, Simulation and tooling forces exerted on rigid non-planar LCM tools, 10^th international conference on flow processes in Composite Materials (FPCM10), Ascona, Switzerland, July 11-15, 2010.
2010	Verleye B, Kelly PA, Bickerton S, A 2.5 Simulation of the Resin Infusion process addressing complex reinforcement compaction response, 14^th European Conference on Composite Materials (ECCM), Budapest, Hungary, 7-10 June 2010.
2010	Govignon Q, Verleye B, Bickerton S, Kelly PA, A 2.5D Model of the Resin Infusion process, experiments and simulation, 7^th ACCM Conference, Taipei, 15-18 Nov, 2010.
2010	Cheng JJ, Kelly PA, Bickerton S, A rate-independent thermomechanical constitutive model for fibrous reinforcements, 10^th international conference on flow processes in Composite Materials (FPCM10), Ascona, Switzerland, July 11-15, 2010.
2010	Govignon Q, Timms J, Bickerton S, Kelly PA, Deviation from Darcy's law during the post-filling stage of resin infusion, 10^th international conference on flow processes in Composite Materials (FPCM10), Ascona, Switzerland, July 11-15, 2010.
2010	Kam W, Kelly PA, Ehrgott M, Verleye B, Bickerton S, Optimisation of mould filling parameters during the compression resin transfer moulding process, 14^th European Conference on Composite Materials (ECCM), Budapest, Hungary, 7-10 June 2010.
2010	Hsu S, Ehrgott M, Kelly PA, Optimisation of mould filling parameters of the compression resin transfer moulding process, Proceedings of the 45^th annual conference of the Operations Research Society of New Zealand, Auckland 29-30 Nov, 2010, 259-270.
2010	Verleye B, Walbran WA, Bickerton S, Kelly P, Simulation and experimental validation of force controlled compression resin transfer moulding, International SAMPE symposium and exhibition, Seattle, USA, 17-20 May 2010.
2010	Verleye B, Walbran WA, Bickerton S, Kelly PA, Simulation of force and velocity controlled compression resin transfer moulding, International SAMPE symposium and exhibition.
2009	MacLaren O, Gan JM, Hickey CMD, Bickerton, S and Kelly PA, The RTM-Light manufacturing process: experimentation and modelling, ICCM17, Edinburgh, Jul 27-31, 2009.
2009	Cheng JJ, Kelly PA and Bickerton S, A thermomechanical constitutive model for fibrous reinforcements, ICCM17, Edinburgh, Jul 27-31, 2009.
2009	Walbran WA, Verleye B, Bickerton S and Kelly PA, Reducing setup costs: Tooling force prediction in Resin Transfer Moulding (RTM) and Compression RTM, 9^th Annual SPE Automotive Composites Conference (ACCE), Troy, Michigan, USA, Sept 15-17, 2009.
2008	Kelly PA, A compaction model for Liquid Composite Moulding fibrous materials, 9^th International Conference on Flow Processes in Composite Materials (FPCM9), Montreal, Jul 8-10, 2008.
2008	Walbran WA, Bickerton, S and Kelly PA, Predicting stress distributions exerted on LCM tools during filling phases, 9^th International Conference on Flow Processes in Composite Materials (FPCM9), Montreal, Jul 8-10, 2008.
2008	Walbran WA, Bickerton, S and Kelly PA, Simulation and verification of local and global forces exerted on rigid LCM tools, International Conference on Textile Composites (TEXCOMP9), Deleware, Oct 13-15, 2008 (in Recent Advances in Textile Composites, Proceedings of the 9^th International conference on textile composites, Ed Advani G and Gillespie J W, DEStech publications, Lancanter, 2008).
2008	Govignon Q, Bickerton S and Kelly PA, Simulation of the complete Resin Infusion process, 9^th International Conference on Flow Processes in Composite Materials (FPCM9), Montreal, Jul 8-10, 2008.
2007	Kelly PA, Johnson C, Simulation of Resin Infusion Processes, the 16^th International Conference on Composite Materials (ICCM-16), Kyoto, Japan, 8-13 July, 2007, 226-227.
2007	Kelly, PA, A fibre compaction model for Liquid Composite Moulding, the 6^th Canadian-International Composites Conference (CANCOM 2007), Winnipeg, Canada, August 14-17, 2007.
2007	Walbran WA, Bickerton, S and Kelly PA, Predicting stress distributions exerted on Liquid Composite Moulding tools using visco-elastic compaction models, 39^th international Society for the Advancement of Material Process Engineering technical conference (SAMPE 07), Cincinnati, USA, Oct 29 – 1 Nov, 2007.
2007	Bickerton S, Kelly PA, Towards a complete tooling force analysis of Liquid Composite Moulding processes, the 6^th Canadian-International Composites Conference (CANCOM 2007), Winnipeg, Canada, 14^th-17^th August, 2007.